- December 12, 2023 Does the CPU need to participate in the process of packets entering from the switch port to the forwarding chip?
- December 7, 2023 What small pluggable (SFP) ports does the Cisco ME 3400 series support?
- December 6, 2023 Switch was originally connected to a machine with a 10/100Mbps adaptive network interface card to work very normally, but now the server connected to the 100Mpbs network interface card has a red light and cannot communicate. Is there a problem with switch?
- Julho 4, 2023 What is Network Descriptor Block (NDB)?
- Julho 4, 2023 What is the significance of Time mentioned in the routing table entry?
- Julho 4, 2023 What does the term threshold and timeout in IP SLA operation mean?
- Julho 4, 2023 How is accounting data age calculated?
- Julho 4, 2023 How do you limit the number of sessions when a customer accesses the network?
- Julho 4, 2023 Can you configure different MTU for subinterfaces under the same main interface? How do 7500/GSR/ESR routers behave in this scenario?
- Julho 4, 2023 What is the difference between point-to-point subinterfaces and multi-point subinterfaces?
- Julho 4, 2023 What is the purpose of ports 2228 e 56506?
- Julho 4, 2023 What is the difference between the two methods to create static routes?
- Julho 4, 2023 How do I connect two different ISPs and route different traffic to different ISPs?
- Julho 4, 2023 What is Virtual Routing and Forwarding (VRF)?
- Julho 4, 2023 Can a VLAN interface and a tunnel interface have the same IP address?
- Julho 4, 2023 What is the Pause control counter?
- Julho 4, 2023 What are the maximum number of secondary IP addesses that can be configured on a router interface?
- Julho 4, 2023 Quem faz o balanceamento de carga quando há vários links para um destino, Encaminhamento Expresso Cisco (CEF), ou o protocolo de roteamento?
- Julho 4, 2023 O que é encaminhamento de caminho reverso Unicast (uRPF)? Uma rota padrão pode 0.0.0.0/0 ser usado para realizar uma verificação uRPF?
- Julho 4, 2023 Tenho quatro caminhos paralelos de custo igual para o mesmo destino. Estou ligando rapidamente dois links e processando a comutação nos outros dois. Como os pacotes serão roteados nesta situação?