Perguntas frequentes

• December 7, 2023 To achieve the function of FEC, connect the two pairs of ports of the two switches with two wires at the same time, but find that each switch is always a normal port, and the other port shows a red light. Is it the fault of the switch’s port?
• December 7, 2023 The computer is connected to other devices through the switch and is on the same network segment, but Ping is not available. What is the problem?
• December 7, 2023 Detailed configuration steps of the three-layer switch
• December 7, 2023 How to configure sub-interfaces for layer 3 comuta
• December 7, 2023 The difference between switch and router in computer room construction
• December 7, 2023 What is the function of the switch?
• December 6, 2023 How to solve the cable failure?
• December 6, 2023 How to solve the backplane failure?
• December 6, 2023 How to solve the module failure?
• December 6, 2023 How to solve the port failure?
• December 6, 2023 How to solve the power failure?
• December 6, 2023 How to clear the configuration of Huawei switch?
• December 6, 2023 Does the S1700-52GFR-4p (Ac) have a routing function?
• December 6, 2023 What is the difference between Huawei S5700S-52P-PWR-LI-AC and Huawei S5700S-52P-LI-AC?
• December 6, 2023 The composition of Huawei M1 S8-302L
• December 6, 2023 Huawei switch command basic configuration process
• December 6, 2023 Huawei switch basic configuration
• December 6, 2023 Does the S5735-L24T4X-A1 have a web interface?
• December 6, 2023 Switch sets up several VLANs. My machines in the same VLAN are not in the same network segment. Can they communicate?
• December 6, 2023 Switch was originally connected to a machine with a 10/100Mbps adaptive network interface card to work very normally, but now the server connected to the 100Mpbs network interface card has a red light and cannot communicate. Is there a problem with switch?