IT Network Equipment Supplier
- July 7, 2023 How can I avoid receiving the “Configuration does not match the port capability” error message when enabling “switchport mode fex-fabric”?
- July 7, 2023 How do I avoid receiving the “Failed to process kickstart image. Pre-Upgrade check failed” error message when upgrading the image on a Nexus 7000 Series Switch?
- July 7, 2023 When I issue the “show ip route bgp” command, I see my routes being learned via OSPF and BGP. How can I verify on the NX-OS which one will always be used and which one is a backup?
- July 7, 2023 What is the equivalent NX-OS command for the “ip multicast-routing” IOS command, and does the Nexus 7000 support PIM-Sparse mode?
- July 7, 2023 How do I redistribute connected routes into an OSPF instance on a Nexus 7010 with a defined metric?
- July 7, 2023 On a Nexus, is the metric-type keyword not available in the “default-information originate” command?
- July 7, 2023 What is the minimum NX-OS release required to support FCoE in the Nexus 7000 Series Switches?
- July 7, 2023 Which Nexus 7000 modules support Fibre Channel over Ethernet (FCoE)?
- July 7, 2023 How many OSPF processes can be run in a virtual device context (VDC)?
- July 7, 2023 What are orphan ports?
- July 7, 2023 Is Nexus 7010vPC feature (LACP enabled) compatible with the Cisco ASA etherchannel feature and with ACE 4710 etherchannel?
- July 7, 2023 How many syslog servers can be added to a Nexus 7000 Series Switch?
- July 7, 2023 Is there a tool available for configuration conversion on Cisco 6500 series to the Nexus platform?
- July 7, 2023 How do I verify the features enabled on Nexus 7000 Series Switch with NX-OS 4.2?
- July 7, 2023 What does the %EEM_ACTION-6-INFORM: Packets dropped due to IDS check length consistent on module message mean?
- July 7, 2023 How do I create a peer link for VDC and a keepalive link for each VDC?
- July 7, 2023 Why does vPC not block either of the vPC uplinks?
- July 7, 2023 What is vPC and what are its benefits?
- July 7, 2023 On a Nexus 7018, when trying to perform a ‘no shut’ on Ethernet 1/3, the ERROR: Ethernet1/3: Config not allowed
- July 7, 2023 What is the command is used to verify the “HSRP Active State” on a Nexus 7000 Series Switch?