Häufig gestellte Fragen

• Juli 7, 2023 Wie kann ich den Erhalt vermeiden? “Die Konfiguration stimmt nicht mit der Portfähigkeit überein” Fehlermeldung beim Aktivieren “Switchport-Modus Fex-Stoff”?
• Juli 7, 2023 How do I avoid receiving the “Failed to process kickstart image. Pre-Upgrade check failed” error message when upgrading the image on a Nexus 7000 Serienschalter?
• Juli 7, 2023 Wenn ich das herausgebe “show ip route bgp” Befehl, I see my routes being learned via OSPF and BGP. How can I verify on the NX-OS which one will always be used and which one is a backup?
• Juli 7, 2023 What is the equivalent NX-OS command for the “ip multicast-routing” IOS command, and does the Nexus 7000 support PIM-Sparse mode?
• Juli 7, 2023 How do I redistribute connected routes into an OSPF instance on a Nexus 7010 with a defined metric?
• Juli 7, 2023 On a Nexus, is the metric-type keyword not available in the “default-information originate” Befehl?
• Juli 7, 2023 What is the minimum NX-OS release required to support FCoE in the Nexus 7000 Serienschalter?
• Juli 7, 2023 Which Nexus 7000 modules support Fibre Channel over Ethernet (FCoE)?
• Juli 7, 2023 Wie viele OSPF-Prozesse können in einem virtuellen Gerätekontext ausgeführt werden? (VDC)?
• Juli 7, 2023 Was sind Orphan-Ports??
• Juli 7, 2023 Ist die Nexus 7010vPC-Funktion (LACP aktiviert) kompatibel mit der Cisco ASA Etherchannel-Funktion und mit ACE 4710 Ätherkanal?
• Juli 7, 2023 How many syslog servers can be added to a Nexus 7000 Serienschalter?
• Juli 7, 2023 Is there a tool available for configuration conversion on Cisco 6500 series to the Nexus platform?
• Juli 7, 2023 How do I verify the features enabled on Nexus 7000 Series Switch with NX-OS 4.2?
• Juli 7, 2023 What does the %EEM_ACTION-6-INFORM: Packets dropped due to IDS check length consistent on module message mean?
• Juli 7, 2023 How do I create a peer link for VDC and a keepalive link for each VDC?
• Juli 7, 2023 Why does vPC not block either of the vPC uplinks?
• Juli 7, 2023 What is vPC and what are its benefits?
• Juli 7, 2023 On a Nexus 7018, when trying to perform a ‘no shut’ on Ethernet 1/3, the ERROR: Ethernet1/3: Config not allowed
• Juli 7, 2023 What is the command is used to verify the “HSRP Active State” on a Nexus 7000 Serienschalter?