Perguntas frequentes

• Julho 7, 2023 How can I avoid receiving the “Configuration does not match the port capability” error message when enabling “switchport mode fex-fabric”?
• Julho 7, 2023 How do I avoid receiving the “Failed to process kickstart image. Pre-Upgrade check failed” error message when upgrading the image on a Nexus 7000 Interruptor de série?
• Julho 7, 2023 Quando eu emito o “show ip route bgp” comando, I see my routes being learned via OSPF and BGP. How can I verify on the NX-OS which one will always be used and which one is a backup?
• Julho 7, 2023 What is the equivalent NX-OS command for the “ip multicast-routing” IOS command, and does the Nexus 7000 support PIM-Sparse mode?
• Julho 7, 2023 How do I redistribute connected routes into an OSPF instance on a Nexus 7010 with a defined metric?
• Julho 7, 2023 Em um Nexus, is the metric-type keyword not available in the “default-information originate” comando?
• Julho 7, 2023 What is the minimum NX-OS release required to support FCoE in the Nexus 7000 Interruptores de série?
• Julho 7, 2023 Which Nexus 7000 modules support Fibre Channel over Ethernet (FCoE)?
• Julho 7, 2023 How many OSPF processes can be run in a virtual device context (CCV)?
• Julho 7, 2023 What are orphan ports?
• Julho 7, 2023 Is Nexus 7010vPC feature (LACP enabled) compatible with the Cisco ASA etherchannel feature and with ACE 4710 etherchannel?
• Julho 7, 2023 How many syslog servers can be added to a Nexus 7000 Interruptor de série?
• Julho 7, 2023 Is there a tool available for configuration conversion on Cisco 6500 series to the Nexus platform?
• Julho 7, 2023 How do I verify the features enabled on Nexus 7000 Series Switch with NX-OS 4.2?
• Julho 7, 2023 What does the %EEM_ACTION-6-INFORM: Packets dropped due to IDS check length consistent on module message mean?
• Julho 7, 2023 How do I create a peer link for VDC and a keepalive link for each VDC?
• Julho 7, 2023 Why does vPC not block either of the vPC uplinks?
• Julho 7, 2023 What is vPC and what are its benefits?
• Julho 7, 2023 Em um Nexus 7018, when trying to perform a ‘no shut’ on Ethernet 1/3, the ERROR: Ethernet1/3: Config not allowed
• Julho 7, 2023 What is the command is used to verify the “HSRP Active State” on a Nexus 7000 Interruptor de série?