One-stop Intelligent It Solutions

Whatisthecommandisusedtoverifythe"HSRPActiveState"onaNexus7000SeriesSwitch?

Cisco Switches FAQS FAQS

Home

What is the command is used to verify the “HSRP Active State” on a Nexus 7000 Series Switch?

What is the command is used to verify the “HSRP Active State” on a Nexus 7000 Series Switch?

July 7, 2023 Admin Cisco Switches FAQS / FAQS 333 Views

The command is show hsrp activeor show hsrp brief.
Nexux_7K# show hsrp br
                   P indicates configured to preempt.
                   |
Interface Grp Prio P State    Active addr   Standby addr   Group addr
Vlan132   32  90   P Standby  10.101.32.253 local          10.101.32.254  (conf)
Vlan194   94  90   P Standby  10.101.94.253 local          10.101.94.254  (conf)
Vlan2061  61  110  P Active   local         10.100.101.253 10.100.101.254 (conf)

Nexus_7K# show hsrp standb br
                     P indicates configured to preempt.
                     |
Interface  Grp Prio  P State    Active addr    Standby addr Group addr
Vlan132    32  90    P Standby  10.101.32.253  local        10.101.32.254 (conf)
Vlan194    94  90    P Standby  10.101.94.253  local        10.101.94.254 (conf)
Vlan196    96  90    P Standby  10.101.96.253  local        10.101.96.254 (conf)

Tags:Cisco Switches