One-stop Intelligent It Solutions

dw@donewin.com.hk    |    

HowdoIredistributeconnectedroutesintoanOSPFinstanceonaNexus7010withadefinedmetric?

Cisco Switches FAQSFAQS

How do I redistribute connected routes into an OSPF instance on a Nexus 7010 with a defined metric?

In NX-OS, a route-mapis always required when redistributing routes into an OSPF instance, and you will also use this route-map to set the metric. Further, subnet redistribution is by default, so you do not have to add the subnetskeyword.

For example:

switch(config)#access-list 101 permit ip <connected network> <wildcard> any
switch(config)#access-list 101 permit ip <connected network> <wildcard> any
switch(config)#access-list 101 permit ip <connected network> <wildcard> any
switch(config)#access-list 101 deny any
!
Router(config)# route-map direct2ospf permit 10
Router(config-route-map)# match ip address 101
Router(config-route-map)# set metric <100>

Router(config-route-map)# set metric-type type-1
!
switch(config)#router ospf 1
switch(config-router)#redistribute direct route-map direct2ospf

Prev:

Next:

Leave a Reply

Live Chat
Leave a message

    − 2 = 1