Huawei switch basic configuration

1. Get the new Huawei switch and use the console cable to connect the switch, and set the default debugging frequency band for configuration.

2. This verification uses two switches for telent test verification.

3. Open switch, first set the device name and manage the IP address.

4. Set the mode of the switch port, configure access to the interface connected to the test telnet pc, configure the default route of the switch, and turn on the switch tenet service.

5. Configure the switch telnet user and the aaa authentication method.

6. Configure the IP address and vlan settings of the client switch to communicate with the server switch.

7. Use clinet switch telnet server10.1.1.1, enter the username and password to log in successfully.