Des postes

• January 29, 2024 Why can’t I execute certain commands or prompt that I have insufficient configuration permissions?
• January 29, 2024 How to change web login password?
• January 29, 2024 Connect the device through the Console port, why does the configuration end point not display or display garbled characters?
• January 29, 2024 Improper configuration: After connecting a workstation to several ports on the switch, it cannot ping other computers in the local area network, mais le “local connection” icon on the desktop still shows network connectivity.
• January 29, 2024 The solution to the backplane failure
• January 29, 2024 Circuit board fault solution
• January 29, 2024 Solutions to module failures
• January 29, 2024 Port failure: The entire network is functioning normally, but individual machines cannot communicate normally.
• January 29, 2024 Power failure solution
• January 21, 2024 助力中国企业出海，出海后网络问题如何解决">助力中国企业出海，出海后网络问题如何解决
• Décembre 25, 2023 Under what circumstances is the root port selected, and the port ID is compared when specifying the port?
• Décembre 25, 2023 Connect the Cisco Catalyst 3524 to an existing network connected by a switch. The main switch is a Catalyst6509, and its GBIC is already connected to the Catalyst4006 switch. I decided to use the port of the Catalyst 6509 module 3 and use a Type 5 adapter cable to connect the fast Ethernet ports, namely the 3/15 port of the Catalyst 6509 and the 0/1 port of the Catalyst 3524. En même temps, set the two ports to 100Mbps, full duplex, the same VLAN1 administrative domain and the same VTP domain and the same VTP mode (server mode). The backbone mode and packaging of the two ports are set to non-negotiated and 802.2q respectively. So there is a problem: when I ping any IP address from the Catalyst 3524 console on the network, although I get a successful rate of 0/5 port, there is no data transfer between the two switches. I suspect that the Catalyst 3524 Ethernet port does not have backbone capability, so I did a port display on the Catalyst 3524 console, but I did not get
• Décembre 22, 2023 How to choose a managed vs unmanaged switch?
• Décembre 19, 2023 How to choose a managed vs unmanaged switch?
• Décembre 19, 2023 What is an industrial switch?
• Décembre 19, 2023 How to use a fiber optic transceiver?
• Décembre 19, 2023 How to use a fiber optic transceiver?
• Décembre 19, 2023 Buy non-standard POE power switch or standard POE power switch?
• Décembre 19, 2023 Buy non-standard POE power switch or standard POE power switch?
• Décembre 19, 2023 What are the differences between managed and unmanaged switches?