AIR-AP1810W-C-K9, providing C Regulatory Domain, is one of the Cisco Aironet 1810W (Wall Plate) Series Access Points. Cisco Aironet 1810W Series Access Points offer a compact, wall plate–mountable access point, ideal for hospitality, cruise ships, residential halls or other multi-dwelling-unit deployments. The Aironet 1810W Series combines Gigabit Ethernet wired and 802.11ac Wave 2 wireless connectivity into a sleek device, built to take advantage of existing cabling infrastructure. This combination reduces total cost of ownership with no compromise to the end user.
Cisco Aironet 1810W Series Access Points datasheet
Quick Specs
Table 1 shows the quick specs of AIR-AP1810W-C-K9.
Product Code | AIR-AP1810W-C-K9 |
Interfaces | – 1 × 10/100/1000BASE-T PoE uplink port
– 1 × Management console port (RJ-45) – 3 × 10/100/1000BASE-T ports (local Ethernet ports), including 1 PoE out port – 1 × passive pass-through port RJ-45 (back to bottom) – 1 × DC power connector |
Features | 2×2 single-user/multiuser MIMO with two spatial streams
Maximal ratio combining (MRC) 20-, 40- and 80-MHz channels PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx) 802.11 Dynamic Frequency Selection (DFS) Cyclic shift diversity (CSD) support |
Regulatory Domain | C (C regulatory domain):
– 2.412 to 2.472 GHz; 13 channels – 5.745 to 5.825 GHz; 5 channels |
System | – 512 MB DRAM
– 256 MB flash – 1.4 GHz system dual-core CPU |
Dimensions (W x L x H) | 165 x 114 x 41 mm (Access point without mounting bracket)) |
Weight | 560g (Access point without mounting bracket or any other accessories) |
Table 2. Cisco Aironet 1810W series access points can be mounted directly on the wall, to numerous global wall junction standards, or on a desk.
Type of Mounting | Mounting Bracket or Kit to be Used |
Wall-mount installation on a single gang junction box or multiple international standards. | AIR-AP-BRACKET-W2
This bracket is shipped with the access point as standard. A spare can also be ordered from Cisco. |
Wall-mount installation directly on wall, where standard junction boxes are not available. | AIR-AP1810W-KIT= spacer kit
This is kit includes an RJ-45 jumper cable and is separately available from Cisco. |
Table-mount installation.
See Figure 4. |
AIR-OEAP1810-CRD= cradle kit
This is kit includes a back cover, RJ-45 jumper cable and is separately available from Cisco. |
Compare to Similar Items
Table 3 shows the comparison between two AP.
Models | AIR-AP1810W-C-K9 | AIR-AP1810W-B-K9 |
Interfaces | – 1 × 10/100/1000BASE-T PoE uplink port
– 1 × Management console port (RJ-45) – 3 × 10/100/1000BASE-T ports (local Ethernet ports), including 1 PoE out port – 1 × passive pass-through port RJ-45 (back to bottom) – 1 × DC power connector |
– 1 × 10/100/1000BASE-T PoE uplink port
– 1 × Management console port (RJ-45) – 3 × 10/100/1000BASE-T ports (local Ethernet ports), including 1 PoE out port – 1 × passive pass-through port RJ-45 (back to bottom) – 1 × DC power connector |
Regulatory Domain | C (C regulatory domain):
– 2.412 to 2.472 GHz; 13 channels – 5.745 to 5.825 GHz; 5 channels |
B (B regulatory domain):
– 2.412 to 2.462 GHz; 11 channels – 5.180 to 5.320 GHz; 8 channels – 5.500 to 5.720 GHz; 12 channels – 5.745 to 5.825 GHz; 5 channels |