The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter links your switches and routers to the network. The hot-swappable input/output device plugs into a Gigabit Ethernet port or slot. Optical and copper models can be used on a wide variety of Cisco products and intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.
1000BASE-T SFP for copper networks The 1000BASE-T SFP operates on standard Category 5 unshielded twisted-pair copper cabling of link lengths up to 100 m (328 ft). Cisco 1000BASE-T SFP modules support 10/100/1000 auto negotiation and Auto MDI/MDIX.
GLC-ZX-SMD Overview
Cisco GLC-ZX-SMD is a 1000BASE-ZX SFP for Long-Reach Single-Mode Fiber. The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 21 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.
When shorter distances of single-mode fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB.
Product Details
Figure 1 shows the GLC-ZX-SMD can be installed in the switch.
Table 1 provides cabling specifications for the SFPs that you install in the Gigabit Ethernet port.
Note that all SFP ports have LC-type connectors, and the minimum cable distance for all SFPs listed (multimode and single-mode fiber) is 6.5 feet (2 m).
SFP Port Cabling Specifications
Product | Wavelength (nm) | Fiber Type | Core Size (μm) | Modal Bandwidth (MHz* Km)*** | Operating Distance (m) |
1000BASE-SX | 850 | MMF | 62.5 | 160 (FDDI-grade) | 220 (722 ft) |
62.5 | 200 (OM1) | 275 (902 ft) | |||
50 | 400 (400/400) | 500 (1,640 ft) | |||
50 | 500 (OM2) | 550 (1,804 ft) | |||
50 | 2000 (OM3) | 1000 (3281 ft) | |||
1000BASE-LX/LH | 1310 | MMF* | 62.5 | 500 | 550 (1,804 ft) |
50 | 400 | 550 (1,804 ft) | |||
50 | 500 | 550 (1,804 ft) | |||
SMF | -** | – | 10,000 (32,821 ft) | ||
1000BASE-EX | 1310 | SMF | -** | – | 40,000 (131,234 ft) |
1000BASE-ZX | 1550 | SMF | – | – | Approximately 70 km depending on link loss |
1000BASE-BX-U | 1310 | SMF | -** | – | 10,000 (32,821 ft) |
1000BASE-BX-D | 1490 | SMF | -** | – | 10,000 (32,821 ft) |
Note:
*A mode-conditioning patch cord, as specified by the IEEE standard, is required regardless of the span length. Note how the mode conditioning patch cord for 62.5-μm fibers has a different specification from the mode-conditioning patch cord for 50-μm fibers.
**ITU-T G.652 SMF as specified by the IEEE 802.3z standard.
***Specified at transmission wavelength.
Get more information
Do you have any question about the GLC-ZX-SMD?
Contact us now via Live Chator sales@router-switch.com.
GLC-ZX-SMD Specification
SFP Port Cabling Specifications |
|||||
Product | Wavelength (nm) | Fiber Type | Core Size (μm) | Modal Bandwidth (MHz* Km)*** | Operating Distance (m) |
1000BASE-SX | 850 | MMF | 62.5 | 160 (FDDI-grade) | 220 (722 ft) |
62.5 | 200 (OM1) | 275 (902 ft) | |||
50 | 400 (400/400) | 500 (1,640 ft) | |||
50 | 500 (OM2) | 550 (1,804 ft) | |||
50 | 2000 (OM3) | 1000 (3281 ft) | |||
1000BASE-LX/LH | 1310 | MMF* | 62.5 | 500 | 550 (1,804 ft) |
50 | 400 | 550 (1,804 ft) | |||
50 | 500 | 550 (1,804 ft) | |||
SMF | -** | – | 10,000 (32,821 ft) | ||
1000BASE-EX | 1310 | SMF | -** | – | 40,000 (131,234 ft) |
1000BASE-ZX
(GLC-ZX-SMD) |
1550 | SMF | – | – | Approximately 70 km depending on link loss |
1000BASE-BX-U | 1310 | SMF | -** | – | 10,000 (32,821 ft) |
1000BASE-BX-D | 1490 | SMF | -** | – | 10,000 (32,821 ft) |
Note:
*A mode-conditioning patch cord, as specified by the IEEE standard, is required regardless of the span length. Note how the mode conditioning patch cord for 62.5-μm fibers has a different specification from the mode-conditioning patch cord for 50-μm fibers.
**ITU-T G.652 SMF as specified by the IEEE 802.3z standard.
***Specified at transmission wavelength.
Cisco SFP Modules for Gigabit Ethernet Applications Data Sheet
Cisco SFP Module Features and benefits
- Hot swappable to maximize uptime and simplify serviceability
- Flexibility of media and interface choice on a port-by-port basis, so you can “pay as you populate”
- Robust design for enhanced reliability
- Supports Digital Optical Monitoring (DOM) capability
The Cisco 1-Gbps SFPs are supported across a variety of Cisco networking equipment*. For more details, refer to the document SFP Compatibility Matrix
Cisco Platforms support
Cisco Platforms | |
|
|
Cisco 1000base SFP Modules Ordering information
Table 5.Ordering information
Product Number | Product Description |
GLC-T | 1000BASE-T standard |
GLC-TE | 1000BASE-T standard |
GLC-T-RGD | 1000BASE-T standard |
SFP-GE-T | 1000BASE-T NEBS 3 ESD |
GLC-SX-MMD | 1000BASE-SX short wavelength; with DOM |
GLC-SX-MM-RGD | 1000BASE-SX short wavelength; rugged |
GLC-LH-SMD | 1000BASE-LX/LH long-wavelength; with DOM |
GLC-LX-SM-RGD | 1000BASE-LX/LH long wavelength; rugged |
GLC-EX-SMD | 1000BASE-EX long-wavelength; with DOM |
GLC-ZX-SMD | 1000BASE-ZX extended distance; with DOM |
GLC-ZX-SM-RGD | 1000BASE-ZX extended distance; rugged |
GLC-GE-DR-LX | 100/1000BASE-LX long-wavelength; with DOM |
GLC-BX-D | 1000BASE-BX10-D downstream bidirectional single fiber; with DOM |
GLC-BX-U | 1000BASE-BX10-U upstream bidirectional single fiber; with DOM |
GLC-BX-D-I | 1000BASE-BX10-D downstream bidirectional single fiber, (IND) rated, with DOM |
GLC-BX-U-I | 1000BASE-BX10-U upstream bidirectional single fiber, (IND) rated, with DOM |
GLC-2BX-D | 2-channel 1000BASE-BX10-D downstream bidirectional single fiber; with DOM |
GLC-2BX-D-I | 2-channel 1000BASE-BX10-D downstream bidirectional single fiber; with DOM |
GLC-BX40-D-I | 1000BASE-BX40-D for 40km Single-Fiber Bidirectional Applications; with DOM |
GLC-BX40-DA-I | 1000BASE-BX40-D (Alternative) for 40km Single-Fiber Bidirectional Applications; with DOM |
GLC-BX40-U-I | 1000BASE-BX40-U for 40km Single-Fiber Bidirectional Applications; with DOM |
GLC-BX80-D-I | 1000BASE-BX80-D for 80km Single-Fiber Bidirectional Applications; with DOM |
GLC-BX80-U-I | 1000BASE-BX80-U for 80km Single-Fiber Bidirectional Applications; with DOM |
SFP-1G-LH | 1000BASE-LX/LH long wavelength module for 10GE ports |
SFP-1G-SX | 1000BASE-SX short wavelength module for 10GE ports |