The H3C S9800 DataCenter Cloud High Density Switch Series is designed for cloud services data centers. It deploys industry leading CLOS architecture, providing highest switching performance and most comprehensive data centre features of this kind in the industry.
S9800 is industry’s highest port density high-end switch per RU. S9810 can provide upto 480 wire speed 10G ports or 120 wire speed 40G ports, delivering super high density 10GE, 40GE and even 100G port density. In order to fulfill data centre cloud virtualization requirements, S9800 switch series supports IRF2 (Intelligent Resilient Framework version 2) and MDC (Multitenant Devices Context). At the same time, S9800 switch series uses latest Comware V7 platform, which is a modular design and reliable, highly efficient and open operating system.
The S9800 switch series includes S9804 and S9810, two models which meet various port density and performance requirements. The S9800 switch series can work with H3C routers, switches, security devices, IMC, and H3Cloud to provide wide variety solutions.
Item | S9804 | S9810 |
Switching capacity | 5.88-17.66Tbps | |
Throughput | 2400-6000Mpps | |
LPU slots | 4 | 10 |
Redundancy | power modules, and fan trays | Redundant MPUs, power modules, and fan trays |
Ethernet | IEEE 802.1Q
DLDP LLDP Static MAC configuration Limited MAC learning Port mirroring and traffic mirroring Port aggregation, port isolation, and port mirroring IEEE 802.1D (STP)/802.1w (RSTP)/802.1s (MSTP) IEEE 802.3ad (dynamic link aggregation), static port aggregation, and multi-chassis link aggregation |
|
IPv4 | Static routing, RIP, OSPF, IS-IS, and BGP4
VRRP, VRRP load balancing ECMP Policy-based routing Routing policy GRE, IPv4 in IPv4 tunneling |
|
IPv6 | IPv4/IPv6 dual stack
IPv6 static routing, RIPng, OSPFv3, IS-ISv6, and BGP4+ VRRPv3 and VRRPv3 load balancing ND and PMTUD Pingv6, Tenetv6, FTPv6, TFTPv6, DNSv6, and ICMPv6 IPv4-to-IPv6 transition technologies, such as IPv6 manual tunnel, 6to4 tunnel, ISATAP tunnel, GRE tunnel, and auto IPv4-compatible IPv6 tunnel ECMP Policy-based routing Policy routing |
|
Multicast | PIM-DM, PIM-SM, PIM-SSM, MSDP, MBGP, and Any-RP
IGMP V1/V2/V3 and IGMP V1/V2/V3 snooping PIM6-DM, PIM6-SM, and PIM6-SSM MLD V1/V2 and MLD V1/V2 snooping Multicast policies and Multicast QoS Multicast replication on switching fabrics and service cards |
|
MPLS VPN | P/PE function in accordance with RFC2547bis
Three inter-AS MPLS VPN modes: Option 1, Option 2 and Option 3 Hierarchy of PE (HoPE) Multi-role host VLL VPLS/H-VPLS Distributed multicast VPN |
|
ACL | Standard and extended ACLs
Ingress and egress ACLs VLAN ACL Global ACLs |
|
QoS | Diff-Serv QoS
SP/SDWRR Traffic policing with 1K granularity Traffic shaping Congestion avoidance Priority marking and remarking 802.1p, TOS, DSCP, and EXP priority mapping VOQ |
|
SDN/OPENFLOW | Support OPENFLOW 1.3 standard
Support multi-controller (EQUAL mode, standby mode) Support multi-table line Support Group table Support Meter |
|
VXLAN | Support VXLAN L2 switching
Support VXLAN L3 switching Support VXLAN gateway Support IS-IS+ENDP VXLAN distributed control plane Support OpenFlow+Netconf VXLAN centralized control plane |
|
HA | FFDR detection engine
1+1 redundancy or key components such as MPUs (Only for S9810) and power modules Passive backplane Hot swapping for all components Real-time data backup on active/standby MPUs (Only for S9810) Hot patching NSR/GR for OSFP/BGP/IS-IS/RSVP Port aggregation and multi-card link aggregation BFD for VRRP/BGP/IS-IS/OSPF/RSVP/static routing, with a failover time less than 50 millisecond IP FRR and TE FRR with a switchover time less than 50 millisecond |
|
Security | Hierarchical user management and password protection
SSHv2 FTP login controlled by IP addresses Basic and advanced ACLs for packet filtering Protection against ARP, unknown multicast packets, broadcast packets, unknown unicast packets, local network scanning packets, packets with TT=1, and protocol packets attacks MAC address control and IP+MAC binding uRPF 802.1x Portal authentication and RADIUS authentication OSPF, RIPv2, BGPv4 pain text and MD5 authentication Secure network management via SNMPv3 and SSHv2 Unknown unicast/multicast, Broadcast packet suppression Active/standby data backup |
|
System management | Command line configuration via Console/AUX Modem/Telnet/SSH2.0
File uploading and downloading via FTP, TFTP, Xmodem, and SFTP SNMP V1/V2c/V3 RMON and groups 1, 2, 3 and 9 NTP clocks NQA(Network Quality Analyzer) Fault alarm and automatic fault recovery System logs |
|
Temperature | Operating temperature: 0°C to 40°C (32°F to 104°F)
Storage temperature: -40°C to 70°C (-40°F to 158°F) |
|
Humidity | 5% to 95% (non-condensing) | |
Environmental protection | WEEE, RoHS | |
Safety | CE, U/cUL, FCC-PART15, VCCI | |
Maximum power consumption | 1380W | 3300W |
Weight (full configuration) | ≤40 kg | ≤80 kg |
Dimensions (H x W x D) | 88.1 x 440 x 720mm | 220 x 440 x 720mm |