MSR5600 router series is designed to meet the new challenges and requirements that wide deployment of cloud services brings to networking.
H3C MSR5600 Router Series Data Sheet
Hardware specifications
Item | MSR5620 | MSR5660 |
CPU | 1.2GHz | 1.5GHz |
DRAM | SPU: 2G/2G | SPU-400-X1: 4G/4G
SPE-S1: 2G/2G SPE-S3: 8G/8G |
Forwarding Performance In Service (IMIX) | 7.5Gbps | SPU-400-X1: 20Gbps
SPU-600-X1+SPE-S1: 5Gbps SPU-600-X1+SPE-S3: 50Gbps SPU-600-X1+2*SPE-S1: 10Gbps SPU-600-X1+2*SPE-S3: 100Gbps |
IPSec performance(iMIX) | 2Gbps | SPU-400-X1: 7Gbps
SPU-600-X1+SPE-S1: 2Gbps SPU-600-X1+SPE-S3: 20Gbps SPU-600-X1+2*SPE-S1: 4Gbps SPU-600-X1+2*SPE-S3: 40Gbps |
Backplane bandwidth | 135Gbps | 670Gbps |
USB 2.0 port | 1/2, support for USB 3G/4G modem | 1/1, support for USB 3G/4G modem |
Fixed GE port | 3 × GE combo ports
2 × SFP+ ports |
SPU-400-X1: 10 × GE combo ports+4 × SFP+ ports
SPE-S1: 4 × GE combo ports+4 × SFP ports SPE-S3: 8 × SFP+ ports |
Console/AUX port | 1 | 1 |
Management Ethernet Port | 1 | 1 |
SIC slot | 4 | N/A |
HMIM slot | 2 | 6 |
DHMIM slot | N/A | 1 |
Max power consumption | 450 W | 450 W |
Power module redundancy | Two built-in power modules | Support for built-in AC/DC power modules and N+1 power module redundancy |
Power voltage | AC: 100 VAC to 240 VAC @ 50 Hz/60 Hz
DC: –48 to –60V |
AC: 100 VAC to 240 VAC @ 50 Hz/60 Hz
DC: –48 to –60V |
Rack height | 2 RU | 4 RU |
Dimensions (H × W × D) | 88.1 × 440 × 480 mm (3.47 × 17.32 × 18.90 in) | 175.1 × 440 × 480 mm (6.89 × 17.32 × 18.90 in) |
Operating temperature | 0ºC to 45ºC (32°F to 113°F) | 0ºC to 45ºC (32°F to 113°F) |
Operating humidity | 5% RH to 95% RH, non-condensing | 5% RH to 95% RH, non-condensing |
EMC | FCC Part 15 (CFR 47) CLASS A
ICES-003 CLASS A VCCI-3 CLASS A VCCI-4 CLASS A CISPR 22 CLASS A EN 55022 CLASS A AS/NZS CISPR22 CLASS A CISPR 24 EN 55024 EN 61000-3-2 EN 61000-3-3 EN 61000-6-1 ETSI EN 300 386 EN 301 489-1 EN 301 489-17 |
FCC Part 15 (CFR 47) CLASS A
ICES-003 CLASS A VCCI-3 CLASS A VCCI-4 CLASS A CISPR 22 CLASS A EN 55022 CLASS A AS/NZS CISPR22 CLASS A CISPR 24 EN 55024 EN 61000-3-2 EN 61000-3-3 EN 61000-6-1 ETSI EN 300 386 EN 301 489-1 EN 301 489-17 |
Security | UL 60950-1
CAN/CSA C22.2 No 60950-1 IEC 60950-1 EN 60950-1/A11 AS/NZS 60950 EN 60825-1 EN 60825-2 FDA 21 CFR Subchapter J GB 4943 |
UL 60950-1
CAN/CSA C22.2 No 60950-1 IEC 60950-1 EN 60950-1/A11 AS/NZS 60950 EN 60825-1 EN 60825-2 FDA 21 CFR Subchapter J GB 4943 |
Software specifications
Item | Specification |
Layer 2 switching | Ethernet, Ethernet II, VLAN (port-based VLAN, guest VLAN), 802.3x, 802.1p, 802.1Q, 802.1X, STP (802.1D), RSTP (802.1w), MSTP (802.1s), PPP, PPPoE client, PPPoE server, HDLC, DDR, modem, and ISDN |
IP services | Unicast/multicast, TCP, UDP, IP option, IP unnumbered, policy-based routing, NetStream, and sFlow
ECMP UCMP |
IP application | Ping, Tracert, ICMP, DHCP server, DHCP relay, DHCP client, DHCP snooping, DNS client, DNS proxy, DDNS, IP Accounting, UDP Helper, NTP, and SNTP |
IPv4 routing | Static routing
Dynamic routing: RIPv1/v2, OSPFv2, BGP, IS-IS Route iteration Policy routing Equal-cost multi-path routing (ECMP) Multicast routing: IGMP v1/v2/v3, PIM-DM, PIM-SM, MBGP, MSDP |
IPv6 | IPv6 ND, IPv6 PMTU, IPv6 FIB, IPv6 ACL, NAT-PT, 6PE, and DS-LITE
IPv6 tunneling: Manual tunneling, automatic tunneling, GRE tunnel, 6to4, ISATAP Static routing Dynamic routing: RIPng, OSPFv3, IS-ISv6, BGP4+ IPv6 multicast: MLDv1/v2, PIM-DM, PIM-SM |
QoS | LR, port-based mirroring, Port Trust Mode, and port priority
Committed access rate (CAR) FIFO, WFQ, CBQ Generic Traffic Shaping (GTS) Traffic classification |
3G/4G | Support for 3G modems
Support for TD-SCDMA, CDMA2000/EVDO, and WCDMA/HSPA+ |
Security | PPPoE client & server, portal, 802.1X
Local authentication, RBAC, RADIUS, TACACS+ Basic Firewall Function, ASPF, ACL, filter, connection limit IKE, IPSec ADVPN, SSL VPN, GDVPN L2TP, NAT/NAPT, PKI, RSA, SSH v1.5/2.0, URPF, mGRE, GRE ARP attack prevention AES, DES, 3DES,MD5, SHA1 Endpoint Admission Defense (EAD) EVI, VXLAN |
MPLS | LDP, Static LSP
L3VPN: Inter-AS MPLS VPN (Option 1/2/3), MPLS nested VPN, hierarchy of PE (HoPE), dual-homed CE, MCE, and multirole host L2VPN: Martini, Kompella, CCC PWs and static PWs MPLS TE, RSVP TE |
High availability | IRF2
VRRP, VRRPv3 Muti-link load-balancing and backup NQA collaboration with routing, VRRP or interface backup BFD collaboration with MPU active/standby switchover |
Management and maintenance | SNMP v1/v2c/v3, MIB, SYSLOG, RMON
BiMS remote management, booting from USB drive CLI, file system, and dual image DHCP, FTP, HTTP, ICMP, UDP public, UDP private, TCP public, TCP private, and SNMP Console port login, Telnet (VTY) login, SSH login, and FTP login |