コンソールポート経由でデバイスを接続します, 構成エンドポイントが表示されない、または文字化けして表示されるのはなぜですか?

After the device is powered on, the configuration end point connected through the Console port does not display information or display garbled characters. 初め, check: whether the power supply is normal; and whether the configuration port (コンソールポート) cable is connected correctly. If the above inspection does not find problems, it is likely that there is a problem with the configuration cable or the setting of the end point parameters is wrong. Please confirm the parameter settings of the end point:

· Baud rate: 9600

Data bits: 8

· Stop bit: 1

Parity check: none

Flow control: none

When you confirm that the end point parameters are set correctly but the fault cannot be solved, replace the configuration cable for replacement testing.