AIR-AP1810W-E-K9, providing E Regulatory Domain, is one of the Cisco Aironet 1810W (Wall Plate) Points d'accès série. Cisco Aironet 1810W Series Access Points offer a compact, wall plate–mountable access point, ideal for hospitality, cruise ships, residential halls or other multi-dwelling-unit deployments. The Aironet 1810W Series combines Gigabit Ethernet wired and 802.11ac Wave 2 wireless connectivity into a sleek device, built to take advantage of existing cabling infrastructure. This combination reduces total cost of ownership with no compromise to the end user.
Cisco Aironet 1810W Series Access Points datasheet
Spécifications rapides
Tableau 1 shows the quick specs of AIR-AP1810W-E-K9.
Code produit | AIR-AP1810W-E-K9 |
Interfaces | – 1 × 10/100/1000BASE-T PoE uplink port
– 1 × Management console port (RJ-45) – 3 × ports 10/100/1000BASE-T (local Ethernet ports), y compris 1 PoE out port – 1 × passive pass-through port RJ-45 (back to bottom) – 1 × DC power connector |
Caractéristiques | 2×2 single-user/multiuser MIMO with two spatial streams
Maximal ratio combining (MRC) 20-, 40- et canaux 80 MHz Débits de données PHY jusqu'à 866.7 Mbit/s (80 MHz on 5 GHz) Agrégation de paquets: A-MPDU (Émission/Réception), A-MSDU (Rx) 802.11 Dynamic Frequency Selection (DFS) Cyclic shift diversity (CSD) soutien |
Domaine réglementaire | E (E domaine réglementaire):
– 2.412 à 2.472 GHz; 13 chaînes – 5.180 à 5.320 GHz; 8 chaînes – 5.500 à 5.700 GHz; 8 chaînes (excludes 5.600 à 5.640 GHz) |
System | – 512 MB DRAM
– 256 MB flash – 1.4 GHz system dual-core CPU |
Dimensions (L x L x H) | 165 X 114 X 41 mm (Access point without mounting bracket)) |
Lester | 560g (Access point without mounting bracket or any other accessories) |
Tableau 2. Cisco Aironet 1810W series access points can be mounted directly on the wall, to numerous global wall junction standards, or on a desk.
Type of Mounting | Mounting Bracket or Kit to be Used |
Wall-mount installation on a single gang junction box or multiple international standards. | AIR-AP-BRACKET-W2
This bracket is shipped with the access point as standard. A spare can also be ordered from Cisco. |
Wall-mount installation directly on wall, where standard junction boxes are not available. | AIR-AP1810W-KIT= spacer kit
This is kit includes an RJ-45 jumper cable and is separately available from Cisco. |
Table-mount installation.
See Figure 4. |
AIR-OEAP1810-CRD= cradle kit
This is kit includes a back cover, RJ-45 jumper cable and is separately available from Cisco. |
Comparer avec des articles similaires
Tableau 3 montre la comparaison entre deux AP.
Models | AIR-OEAP1810-E-K9 | AIR-AP1810W-E-K9 |
Special Feature | OfficeExtend | N / A |
Interfaces | – 1 × 10/100/1000BASE-T PoE uplink port
– 1 × Management console port (RJ-45) – 3 × ports 10/100/1000BASE-T (local Ethernet ports), y compris 1 PoE out port – 1 × DC power connector |
– 1 × 10/100/1000BASE-T PoE uplink port
– 1 × Management console port (RJ-45) – 3 × ports 10/100/1000BASE-T (local Ethernet ports), y compris 1 PoE out port – 1 × passive pass-through port RJ-45 (back to bottom) – 1 × DC power connector |
Domaine réglementaire | E (E domaine réglementaire):
– 2.412 à 2.472 GHz; 13 chaînes – 5.180 à 5.320 GHz; 8 chaînes – 5.500 à 5.700 GHz; 8 chaînes (excludes 5.600 à 5.640 GHz) |
E (E domaine réglementaire):
– 2.412 à 2.472 GHz; 13 chaînes – 5.180 à 5.320 GHz; 8 chaînes – 5.500 à 5.700 GHz; 8 chaînes (excludes 5.600 à 5.640 GHz) |