H3C CR16000-M router are digital era-oriented cloud service routers applicable to government, finance, transport, power grid, healthcare, education, and carriers. With a carrier-level HA and programmable NP architecture design, the router provides abundant features to process cloud services, carrier-level high availability, and exceptional forwarding capacity.
With high-density 100GE, 10GE, and GE ports and 155M/622M/2.5G POS, CPOS, and E1/T1 WAN ports, the routers can be deployed at different network positions. The router runs the state-of-the-art Comware network operating system, which is open, containerized, and programmable to meet user requirements in new businesses.
H3C CR16000-M Routers Data Sheet
Technische Spezifikationen
Artikel | CR16000-M8 | CR16000-M16 |
Bi-direction Forwarding Capacity | 800Gbit/s | 800Gbit/s |
Chassis | Integrated chassis, which can be installed in a 19-inch rack | |
MPUs | 2 | 2 |
Line cards | 8 | 16 |
Unabhängige Switching-Fabric-Module | 2 | 2 |
Cooling | Front-to-rear airflow | Front-to-rear airflow |
Independent fan trays | Independent fan trays in redundancy | Independent fan trays in redundancy |
Power system | Four built-in AC and DC power modules (N+M redundancy), without occupying any service module slot. | Four built-in AC and DC power modules (N+M redundancy) , without occupying any service module slot. |
Maße (H × W× D) | 267 × 440 × 440 mm (10.51 × 17.32 × 17.32 In, 6 RU) | 356 × 440 × 440 mm (14.02 × 17.32 × 17.32 In, 8 RU) |
Häfen | FE, GE, 10GE (LAN/WAN), 100GE, 155M POS, 622M POS, 2.5G POS, CPOS, ATM, and E1/T1 ports
Interface type changing between 100GE and 40GE Interface type changing between 155M POS, 622M POS, and GE Interface type changing between ATM/ and POS |
|
Unicast routing | IPv4/IPv6-Dual-Stack
Statisches Routing, RUHE IN FRIEDEN, RIPng, OSPF, OSPFv3, IS-IST, IS-ISv6, BGP, und BGP4+ VRRP and VRRPv3 IPv6 neighbor discovery, PMTU discovery, TCP6, ping IPv6, traceroute IPv6, socket IPv6, static IPv6 DNS, specified IPv6 DNS server, and TFTP IPv6 client IPv4 to IPv6 transition ICMPv6 MIB, UDP6 MIB, TCP6 MIB, and IPv6 MIB ECMP and UCMP Richtlinienbasiertes Routing Routing-Richtlinie Tunnels such as GRE Static routing FRR, OSPF FRR, ISIS FRR, and BGP FRR |
|
Multicast | Routing protocols, including PIM-DM, PIM-SM, PIM-SSM, MSDP, MBGP, and Anycast-RP
IGMPv1/v2/v3 and IGMP snooping v1/v2/v3 PIM6-DM, PIM6-SM, und PIM6-SSM MLDv1/v2 and MLD snooping v1 Multicast policy and multicast QoS |
|
MPLS VPN | MPLS label distribution protocols such as LDP and RSVP-TE
P/PE compliant with RFC 2547bis Three inter-AS MPLS VPN methods (option1/option2/option3) Hoffnung Multi-role host L2VPN, L3VPN, inter-AS L2VPN and L3VPN MPLS TE FRR and LDP FRR, with a switchover time of not more than 50ms 6PE and 6vPE Distributed multicast VPN ACL, which identifies traffic and forwards the traffic to different VPNs MPLS VPN network troubleshooting features, including MPLS ping and MPLS traceroute L2VPN access to L3VPN Access to VPLS via QinQ |
|
BRAS service | PPPoE, PPPoEoVLAN, and PPPoEoQ access authentication
Schicht 2 portal, Schicht 3 portal, and QinQ portal access authentication IPoE, IPoEoVLAN, and IPoEoQ access authentication Leased access authentication such as subnet-leased, interface-leased, and L2VPN-leased access authentication L2TP Schicht 2 transparent access and Layer 3 transparent access Authentication, authorization, and accounting cooperating with standard RADIUS/TACACS+ protocol RADIUS, TACACS, and COPS protocols iTA, which differentiates services by destination addresses to perform accounting, bandwidth control, und QoS Unified wired and wireless authentication solutions, which meet the demands for massive user access and wireless client mobility BRAS IRF, which offers redundancy and simplifies Ops |
|
ACL | IPv4 and IPv6 ACL and EACL
Eingangs-/Ausgangs-ACL Hardware-based ACL |
|
QoS | HQoS
Queue scheduling mechanisms such as PQ, WFQ, and CBWFQ More granular and flexible traffic control through HQoS Verkehrsformung Congestion avoidance technologies such as tail drop and WRED drop Prioritätsmarkierung und Bemerkung 802.1P, AGB, DSCP, and EXP priority mappings Stauvermeidung, traffic policing, and traffic shaping Data packet marking based on IP addresses, port numbers, 802.1P, and DSCP values Data packet multilevel queue mechanisms include CQ, PQ, LLQ, and WFQ Multicast QoS |
|
Ethernet features | 802.1Q
ARP 802.1Q VLAN trunk QinQ termination 802.3d (STP)/802.3w (RSTP)/802.3S (MSTP) IEEE 802.3ad (link aggregation), static link aggregation, and link aggregation across different modules Aggregation of ports with different transmission rates Port mirroring and flow mirroring FlexE Channelized sub-interfaces |
|
SDN technologies | VXLAN and EVPN
PCEP protocol Network information collection protocols such as BGP-LS NETCONF and YANG MPLS SR and SRv6 CBTS Offener Fluss BGP FlowSpec Telemetrie 5G bearer network technologies such as EVPN, SRv6, and 1588v2 |
|
Verkehrsanalyse | NetStream, which supports the version 5, version 7, and version 9 data export formats, sampling, and flow statistics
Multi-log host Hardware-based NTA IPv4/IPv6/MPLS traffic collection and analysis Traffic collection and analysis in the inbound and outbound directions of interfaces Abnormal traffic detection and monitoring |
|
Hohe Verfügbarkeit | MPU, switching fabric module, power module, and fan tray redundancy
Separation of the control plane and switching plane Unabhängige Switching-Fabric-Module Automatic fan speed adjustment Built-in DC and AC power modules, which can be installed on the same router and do not occupy service slots NSF, NSR, and GR BFD, which supports fast failure detection and a switchover time of not more than 50ms iFIT, which can detect network failures in real time, troubleshoot the network failures, and implement visible management over performance data |
|
System management | In-band and out-of-band network management
Console/AUX Modem/Telnet/SSH2.0 CLI-based configuration FTP, TFTP, XMODEM, and SFTP file uploading and downloading management SNMP v1/v2/v3 RMON v1/v2 (groups 1, 2, 3, Und 9) NTP Qualitätssicherung Fault alarms and self-healing DHCP Data logs ICMP Syslog Traceroute Multithreading access to the device via Telnet 1588v2 |
|
Ambient temperature | Betriebs: 0°C bis 45 °C (32°F bis 113°F) |