PRÉSENTATION DU PRODUIT
Designed for the digital workplace, the Aruba 2540 Switch Series is optimized for today’s mobile and IoT needs. Le commutateurs are easy to deploy, utiliser et gérer à l'aide d'Aruba AirWave ou d'Aruba Central. Aruba ClearPass offre une sécurité centralisée et une prise en charge de portail captif externe. The Aruba 2540 Switch Series provides a convenient and cost-effective wired access solution that can be quickly set up with Zero Touch Provisioning. PoE+ models deliver power across all access ports for wireless APs, des caméras de sécurité, and other IoT devices. Le 2540 has wire-speed backhaul bandwidth capacity with built-in 10 GbE uplinks, QoS robuste, static and RIP routing, IPv6 and includes a limited lifetime warranty with no software licensing required.
Modèle | JL356A |
Ports | 24 Détection automatique RJ-45 10/100/1000 Ports PoE+ (IEEE 802.3 Tapez 10BASE-T, IEEE 802.3u Type 100BASE- TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: à moitié ou plein; 1000BASE-T: plein seulement 4 Ports SFP+ 1/10GbE; Sans PHY |
Ports et emplacements supplémentaires | 1 double personnalité (RJ-45 ou USB micro-B) port de console série |
Memory and processor | Dual Core ARM Coretex A9 @ 1016 MHz, 1 GB DDR3 SDRAM
Packet buffer size: 12.38 Mo 4.5 MB Ingress/7.785 MB Egress, 4 GB eMMC |
Dimensions | (H) 4.39 cmx (W) 44.42 cmx (D) 30.42 cm (1.73” x 17.42” x 11.98”) (1Hauteur en U) |
Débit | jusqu'à 95.2 Députés |
Capacité de commutation | 128 Gbit/s |
ENHANCED FEATURES
Réseaux définis par logiciel
• Supports REST APIs to enable automation of network operations, surveillance, et dépannage
Unified Wired and Wireless
• Supports unified wired and wireless policies using Aruba ClearPass Policy Manager • Switch auto-configuration automatically configures switches for different settings such as VLAN, CoS, PoE max power, et priorité PoE lorsqu'un point d'accès Aruba est détecté. • Le rôle utilisateur définit un ensemble de politiques basées sur le commutateur dans des domaines tels que la sécurité., authentification, et QoS. Un rôle d'utilisateur peut être attribué à un groupe d'utilisateurs ou d'appareils, using switchbased local user role or download from ClearPass • Static IP Visibility allows ClearPass to do accounting for clients with static IP address
Quality of Service (QoS)
• Traffic prioritization (IEEE 802.1p) allows real-time traffic classification into eight priority levels mapped to eight queues • Layer 4 prioritization based on TCP/UDP port numbers • Class of service (CoS) sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Couche 3 protocole, TCP/UDP port number, source port, and DiffServ • Rate limiting sets per-port ingress enforced maximums and per-port, per-queue minimums • Large buffers provide graceful congestion management
Connectivity
• Flexible 10 Gbps Ethernet with four built-in 10 Gigabit ports (SFP+) • Auto-MDIX provides automatic adjustments for straight-through or crossover cables on all 10/100 et 10/100/1000 ports • IEEE 802.3at Power over Ethernet (PoE+) provides up to 30 W per port that allows support of the latest PoE+capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3afcompliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments • Pre-standard PoE support detects and provides power to pre-standard PoE devices • IPv6 -IPv6 host Enables switches to be managed in an IPv6 network -Dual stack (IPv4 and IPv6) Transitions from IPv4 to IPv6, supporting connectivity for both protocols -MLD snooping Forwards IPv6 multicast traffic to the appropriate interface -IPv6 ACL/QoS Supports ACL and QoS for IPv6 network traffic -IPv6 routing Supports static and RIPng protocols -Security Provides RA guard, DHCPv6 protection, dynamic IPv6 lockdown, and ND snooping